Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Temperature Sensor on the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018

In this video tutorial, we will go through the steps to remove and replace the external temperature sensor on the Ford Focus. First, locate the temperature sensor on the driver's side external mirror. Remove the plastic cover by prying it off from the sides, and take out the mirror glass as shown in the video. Next, unscrew the mirror mounting screws to remove it, disconnecting the electrical connector; remove the temperature sensor and replace it with the new one, following the video to the end!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Coolant Temperature Sensor of the Ford Focus 2.0L
Replacing the Coolant Temperature Sensor of the Ford Focus 2.0L
Ford Focus (2011-2018 / MK 3) Below are the main instructions to remove and replace the coolant temperature sensor of the Ford Focus 2.0L engine. First, open the bonnet of the veh…
How to Replace the Temperature Sensor on a Ford Focus
How to Replace the Temperature Sensor on a Ford Focus
Ford Focus (1998-2004 / MK 1) To replace the temperature sensor on a Ford Focus, start by removing the 3 spark plugs. Use a screwdriver to remove the top cap from the sensor, disc…
How to Replace the Internal Temperature Sensor in a Ford Focus?
How to Replace the Internal Temperature Sensor in a Ford Focus?
Ford Focus (2011-2018 / MK 3) In this tutorial, you will learn how to replace the internal temperature sensor in a Ford Focus, a very simple and quick operation. First, ensure tha…

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos