Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the rear brake pads on a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Brake pads

Today we will see how to replace the rear brake pads on a Ford Kuga, second generation model produced from 2012 to 2019. We start the procedure by lifting the vehicle and removing the rear wheel, then we remove the metal fixing tab on the front of the brake caliper and unscrew the two screws on the back of the caliper as shown in the video. Once this is done, we can open the brake caliper and remove the worn pads, finally we retract the brake piston and insert a pair of new pads following the reverse procedure.

Posted on 11 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga (2012-2019 / C520, MK 2) Below are the main instructions to remove and replace the rear brake pads of the Ford Kuga. First, lift the vehicle and begin by removing the front w…
Ford Kuga (2012-2019 / C520, MK 2) This guide shows how to replace the rear brake discs and pads on the Ford Kuga Mk2. First, secure and lift the vehicle after removing the wheel bolts…
Ford Kuga (2012-2019 / C520, MK 2) To adjust the handbrake on a Ford Kuga 2, park the vehicle on a flat surface and ensure it is secure. Access the area of the handbrake lever, located…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos