Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Disc and Pads on the Ford Kuga Mk2

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Brake pads

See other generations:
Video tutorial

This guide shows how to replace the rear brake discs and pads on the Ford Kuga Mk2. First, secure and lift the vehicle after removing the wheel bolts. Once the wheel is off, detach the retaining spring of the caliper bolts and unscrew these elements.

After extracting the caliper, unscrew the caliper bracket bolts and remove the disc. Clean the hub and brake mechanism.

Install the new disc and refit the caliper bracket. Push the caliper pistons fully back and install the new pads lubricated with the appropriate grease.

Refit the caliper and the retaining clips. Check the proper functioning of the braking system.


Updated on 7 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Brake Pads of the Ford Kuga
Replacing the Rear Brake Pads of the Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) Below are the main instructions to remove and replace the rear brake pads of the Ford Kuga. First, lift the vehicle and begin by removing the front w…
Replacement of the rear brake pads on a Ford Kuga
Replacement of the rear brake pads on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) Today we will see how to replace the rear brake pads on a Ford Kuga, second generation model produced from 2012 to 2019. We start the procedure by li…
How to Reset the BMS in a Ford Kuga MK2
How to Reset the BMS in a Ford Kuga MK2
Ford Kuga (2012-2019 / MK 2, C520) In this video tutorial, you can see how to reset the BMS (Battery Management System) in a Ford Kuga MK2. The BMS is an electronic system for the comp…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos