Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the BMS in a Ford Kuga MK2

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Onboard computer

In this video tutorial, you can see how to reset the BMS (Battery Management System) in a Ford Kuga MK2. The BMS is an electronic system for the complete electronic control of all diagnostic and safety functions, ensuring optimal technical and energy performance. After replacing the old battery with a new one, get inside the vehicle, turn on the ignition without starting the engine, and press the rear fog light button five times. Next, press the hazard light button three times; after about 5 seconds, the battery icon will start flashing on the instrument cluster. If you have followed all the steps correctly, the BMS reset has been successful; otherwise, repeat the process from the beginning.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the BMS on the Ford Kuga
How to reset the BMS on the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Today we will see step by step instructions on how to reset the Battery Monitoring System (BMS) of the Ford Kuga. In the initial part of the video, t…
How to replace the battery of the 2019 Ford Kuga
How to replace the battery of the 2019 Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Today we will explain how to replace the battery of the 2019 Ford Kuga. The battery is located inside the front hood, above the fuse box so before st…
How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) If you want the service light (or maintenance light) not to appear every time you start your Ford Kuga, simply perform a manual reset. The entire pro…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos