Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the BMS on the Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Warning light – error code

Today we will see step by step instructions on how to reset the Battery Monitoring System (BMS) of the Ford Kuga. In the initial part of the video, the procedure for disassembly and replacement of the battery is illustrated; then we get into the car and turn on the instrument panel, pressing the fog light button five times and the hazard lights button three times to permanently deactivate the BMS light, as shown in the video. At this point, we turn off the instrument panel and start the engine, checking that the BMS has been reset!

Posted on 27 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the BMS in a Ford Kuga MK2
How to Reset the BMS in a Ford Kuga MK2
Ford Kuga (2012-2019 / C520, MK 2) In this video tutorial, you can see how to reset the BMS (Battery Management System) in a Ford Kuga MK2. The BMS is an electronic system for the comp…
How to replace the battery of the 2019 Ford Kuga
How to replace the battery of the 2019 Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Today we will explain how to replace the battery of the 2019 Ford Kuga. The battery is located inside the front hood, above the fuse box so before st…
How to reset the service light on the Ford Kuga.
How to reset the service light on the Ford Kuga.
Ford Kuga (2012-2019 / C520, MK 2) To reset the service light on a Ford Kuga vehicle, it is important that the necessary maintenance operations have been performed in the workshop for …

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the message "Fuel computer data error" indicate in the Ford Kuga? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos