Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield wiper blades of a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Windshield wipers

To replace the windshield wiper blades of a Ford Fiesta, start by gently lifting the wiper arm and positioning it vertically. Once lifted, locate the small locking hook near the connection point of the blade. Press the hook towards the windshield and at the same time push the blade towards the windshield. This will unlock the blade from the wiper arm. Remove the old blade by pulling it away from the arm. Be careful not to let the wiper arm fall against the windshield to avoid damage. Once the old blade is removed, make sure the new blade is the correct size and has a compatible attachment with the wiper arm. With the new blade, align the mounting hook with the arm and slide the blade until it securely locks into place. Make sure the new blade is securely attached to the arm to ensure effective windshield cleaning. Repeat the same process to replace the other wiper blade, and you're done.

Posted on 20 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Ford Fiesta
How to Replace the Wiper Blades on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will see how to replace the wiper blades on a Ford Fiesta by following a few simple steps: first, purchase new wiper blad…
Change Windshield Wiper Blade on Ford Fiesta
Change Windshield Wiper Blade on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Are the wiper blades damaged? Let’s see how to remove the front blades on a Ford Fiesta. Take the damaged blade in your hands: gently pull the movabl…
How to Replace the Wiper Blades on the Ford Fiesta 6?
How to Replace the Wiper Blades on the Ford Fiesta 6?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) When worn, wiper blades cannot clean the windscreen adequately and leave streaks that prevent a perfect view of the road. When this occurs, it is nec…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos