Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Wiper Motor on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Windshield wipers

Let's look at removing the rear wiper motor on a Ford Fiesta. Lift the tailgate, and remove the plastic cover under the rear window on the inside to access the motor. Unscrew the fastening screw of the wiper arm: remove the piece. Unscrew the screws of the wiper motor, then disconnect the electrical connector. Replace the removed part with a new original or similarly shaped and functional one. Refit all the covering parts of the rear wiper motor. Test the operation of the new rear wiper motor.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear tailgate panel of the Ford Fiesta
How to disassemble the rear tailgate panel of the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Today we will discover the main steps that will allow us to disassemble and remove the inner panel of the rear tailgate of the Ford Fiesta. First of …
How to Remove Spark Plugs on a Ford Fiesta
How to Remove Spark Plugs on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Learn how to remove the spark plugs from a Ford Fiesta. Lift the bonnet to access the Fiesta's engine. Remove the engine cover panel, grasp the coil …
Replacing the Alternator on the Ford Fiesta
Replacing the Alternator on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This short guide will provide instructions for removing and replacing the alternator on the Ford Fiesta. First, open the engine bonnet and start by d…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos