Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the wheel with the spare one of the Ford Ranger

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Heater control valve

Today's instructions will show us how to disassemble and replace the wheel with the spare one on the Ford Ranger. First, we take the wheel replacement kit and unscrew the screw found on the rear bumper, releasing the rear wheel cable and allowing access to the spare one; we lift the vehicle and unscrew the wheel bolts to remove it, as shown in the video. At this point, we install the spare wheel, securing the bolts in a crisscross pattern; reposition the old wheel in the rear compartment, pulling the cable and screwing the screw on the bumper.

Posted on 20 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the spare tire from the Ford Ranger.
How to remove the spare tire from the Ford Ranger.
Ford Ranger (2011-2023 / T6, P375, PX) In this article, we will see how to remove the spare wheel from the Ford Ranger. To do this, you will need the appropriate tools provided. First, you…
Where is the fuse box of the Ford Ranger located?
Where is the fuse box of the Ford Ranger located?
Ford Ranger (1993-1997 / MK 2) To find the fuse box inside your Ford Ranger, you must follow the steps described in this new mini guide dedicated to you. First of all, you must ope…
How to replace the turn signals on the external rearview mirror of the Ford Ranger
How to replace the turn signals on the external rearview mirror of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) Today we will explain how to replace the turn signal bulb of the Ford Ranger T6 model. Press on the mirror to push it upwards in order to remove the …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos