Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the external rearview mirror of the Ford Galaxy

Model: Ford Galaxy MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Side mirror

See other generations:
Video tutorial

In this short guide, we will see the instructions that will allow us to disassemble and replace the external rearview mirror of the Ford Galaxy. First, we open the front door of the car and start disassembling and removing the front door panel, unscrewing all the fixing screws and disconnecting the electrical connector of the window switch; then we unscrew the fixing screws of the external rearview mirror, disconnecting the wiring and pulling it out from the outside, as shown in the video.

At this point, we install the new mirror, reassembling all the door elements!


Posted on 25 April 2025 by ScegliAuto


Related tutorials

How to Replace the Wing Mirror on a Ford Galaxy?
How to Replace the Wing Mirror on a Ford Galaxy?
Ford Galaxy (2006-2015 / MK 2) To replace the wing mirror on a Ford Galaxy, loosen the screws that secure the door panel to its housing. These screws are located at the bottom, ins…
How to Replace the Fog Light Bulb of the Ford Galaxy 3
How to Replace the Fog Light Bulb of the Ford Galaxy 3
Ford Galaxy (2015-2023 / MK 3) If you want to replace the fog light bulb of your Ford Galaxy Mk3 yourself, simply read this guide and follow the various steps described. First, par…
Replacing the Battery on a Ford Galaxy
Replacing the Battery on a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) This guide provides step-by-step instructions to remove and replace the battery on a Ford Galaxy in simple and quick steps. First, open the bonnet an…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos