Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rearview mirror of the Ford Galaxy?

Model: Ford Galaxy MK 2 - Years 2006-2015
Part: Side mirror

In order to replace the rearview mirror of the Ford Galaxy, you need to loosen the screws that secure the door panel to its housing: these screws that secure the panel are located at the bottom, inside the handle seat and near the window switch panel. Once all these screws are loosened, you can remove the panel and the inner lining corresponding to the mirror: then the screws underneath can be loosened in order to remove the external rearview mirror and replace it with a new spare part.

Posted on 1 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external rearview mirror of the Ford Galaxy
How to disassemble the external rearview mirror of the Ford Galaxy
Ford Galaxy (1995-2006 / MK 1) In this short guide, we will see the instructions that will allow us to disassemble and replace the external rearview mirror of the Ford Galaxy. Firs…
Where is the fuse box of the Ford Galaxy 2 located?
Ford Galaxy (2006-2015 / MK 2) The fuse box of your Ford Galaxy second series (year 2006-2015) is located inside the engine compartment and in this new mini guide we will discover …
How to Replace the Fog Light on the Ford Galaxy?
How to Replace the Fog Light on the Ford Galaxy?
Ford Galaxy (2006-2015 / MK 2) The fog light bulb on the Ford Galaxy, like any other vehicle, can be considered a DIY task and can be done easily with minimal tools. Proceed as fol…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos