Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulb of the Ford Galaxy 3

Model: Ford Galaxy MK 3 - Years 2015-2023
Part: Fog lights

If you want to replace the fog light bulb of your Ford Galaxy Mk3 on your own, all you have to do is read the following guide and follow all the steps described. First of all, park the car on a flat surface and turn it off completely. Immediately after, go outside and reach the front bumper area. At this point, remove the plastic cover around the fog light and unscrew the screws with a suitable screwdriver or battery-powered screwdriver. Once you have done this, remove the light and proceed with the replacement of the bulb. Finally, reassemble everything and you're done.

Posted on 3 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fog Light on the Ford Galaxy?
How to Replace the Fog Light on the Ford Galaxy?
Ford Galaxy (2006-2015 / MK 2) The fog light bulb on the Ford Galaxy, like any other vehicle, can be considered a DIY task and can be done easily with minimal tools. Proceed as fol…
Replacing the Fog Light Bulb on a Ford Galaxy
Replacing the Fog Light Bulb on a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) Let's look at removing the fog light from a Ford Galaxy to replace the damaged bulbs. Start by removing the fog light from underneath the bumper. Acc…
How to Remove the Radio from a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) Before you can start, sit in the driver's seat of your Ford Galaxy. Begin by prising off and removing the radio trim to expose the fixing screws. Nex…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos