Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rearview mirror of the Ford Focus

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Side mirror

See other generations:
Video tutorial

In the following guide, we will discover how to replace the external rearview mirror of your Ford Focus. First of all, make sure you have a new rearview mirror that is perfectly compatible at hand, then get into the car and proceed with removing the plastic cover located near the mirror.

At this point, disconnect the electrical cables and unscrew the screws with a suitable key. Next, go outside and complete the removal of the rearview mirror. Finally, install the new mirror following the reverse order of the steps.


Posted on 8 May 2025 by ScegliAuto


Related tutorials

How to Remove the External Wing Mirror on the Ford Focus
How to Remove the External Wing Mirror on the Ford Focus
Ford Focus (1998-2004 / MK 1) Today's instructions will show you how to remove and replace the external wing mirror on the Ford Focus. First, open the front door and begin removin…
How to remove the cover of the external rearview mirror of the Ford Focus
How to remove the cover of the external rearview mirror of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) When we need to replace the external rearview mirror of the Ford Focus, we must use a flat-head screwdriver. We remove the mirror by levering it outw…
How to replace the external rearview mirror of the Ford Focus
How to replace the external rearview mirror of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today's instructions will show us how to disassemble and replace the external rearview mirror of the Ford Focus. First, we open the front door of the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos