Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the 2020 Ford Puma

Model: Ford Puma MK 1 - Years 2019-2026
Part: Tail light bulb

To replace the reverse lights bulbs on a 2020 Ford Puma vehicle, we need to open the trunk and remove the cover located on the side of the trunk. Disconnect the headlight connector to remove it and open the dome light cover, remove the bulb and insert a new h7 model in its place. After inserting the bulb, reinsert the headlight into its housing, reconnect the connector, and mount the trunk cover. Close the trunk and turn on the lights to test the bulbs. If they do not work, it may be necessary to check the fuse.

Posted on 15 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear headlight of the Ford Puma
How to disassemble the rear headlight of the Ford Puma
Ford Puma (2019-2026 / MK 1) To safely and correctly disassemble one of the rear lights of your Ford Puma Mk2, you must carefully read the procedure described below and follow al…
How to replace the rear turn signal bulbs of the Ford Puma
How to replace the rear turn signal bulbs of the Ford Puma
Ford Puma (2019-2026 / MK 1) Replacing the rear side indicator bulbs on a 2020 Ford Puma vehicle is a simple operation that can be done independently. First, open the trunk and t…
How to disassemble the front headlight of the Ford Puma
How to disassemble the front headlight of the Ford Puma
Ford Puma (2019-2026 / MK 1) If you want to disassemble one of the front headlights of your new Ford Puma on your own, but you do not know the steps to follow, then all you have …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos