Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear turn signal bulbs of the Ford Puma

Model: Ford Puma MK 1 - Years 2019-2026
Part: Side marker bulb

Replacing the rear side indicator bulbs on a 2020 Ford Puma vehicle is a simple operation that can be done independently. First, open the trunk and then lift the side carpet to access the headlight. Unscrew the headlight cap counterclockwise and then remove the non-working bulbs to insert the new ones and mount the headlight cap and then the carpet. Once the replacement is complete, close the trunk and turn on the vehicle lights to test their operation, if the problem persists, it is necessary to proceed with the replacement of the fuse.

Posted on 20 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the 2020 Ford Puma
How to replace the rear headlight bulb of the 2020 Ford Puma
Ford Puma (2019-2026 / MK 1) To replace the reverse lights bulbs on a 2020 Ford Puma vehicle, we need to open the trunk and remove the cover located on the side of the trunk. Dis…
How to disassemble the rear headlight of the Ford Puma
How to disassemble the rear headlight of the Ford Puma
Ford Puma (2019-2026 / MK 1) To safely and correctly disassemble one of the rear lights of your Ford Puma Mk2, you must carefully read the procedure described below and follow al…
How to replace the air filter of the Ford Puma
How to replace the air filter of the Ford Puma
Ford Puma (2019-2026 / MK 1) Today we will explain how to replace the air filter on a Ford Puma car. Replacing the air filter is one of those operations that is part of the servi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos