Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of the Ford Puma

Model: Ford Puma MK 1 - Years 2019-2026
Part: Tail light

To safely and correctly disassemble one of the rear lights of your Ford Puma Mk2, you must carefully read the procedure described below and follow all the steps. First, make sure you have parked the vehicle on a flat surface, then turn it off and go outside. At this point, reach the rear area of the car and lift the hood completely. Immediately after, remove the plastic cover located on the side of the trunk and unscrew the safety hook. Finally, pull the rear light towards you and disconnect the electrical cables.

Posted on 11 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the 2020 Ford Puma
How to replace the rear headlight bulb of the 2020 Ford Puma
Ford Puma (2019-2026 / MK 1) To replace the reverse lights bulbs on a 2020 Ford Puma vehicle, we need to open the trunk and remove the cover located on the side of the trunk. Dis…
How to Remove the Door Panel of the Ford Puma?
How to Remove the Door Panel of the Ford Puma?
Ford Puma (1997-2002 / Coupe) To remove the door panel of the Ford Puma, you need to detach the triangular cover located on the inside near the external mirror. Once this is remov…
How to replace the battery of the Ford Puma 2022 remote control
How to replace the battery of the Ford Puma 2022 remote control
Ford Puma (2019-2026 / MK 1) In this new guide you will find the description of all the steps you need to follow to correctly replace the battery inside the remote control of you…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos