Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of a Ford Puma

Model: Ford Puma MK 1 - Years 2019-2026
Part: Headlight

Before you can start, open the bonnet. It is highly recommended to disconnect the battery before performing this operation. Begin by removing the front trim by unscrewing the side screws that secure it using a Torx T20. Once the front trim is removed, you will have access to the screws that secure the headlamp. Next, unscrew these screws. After completing this step, you can extract the headlamp from its housing. Before you can fully remove it, simply disconnect the connector. Once done, you will have successfully completed the disassembly.

Updated on 1 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to disassemble the front headlight of the Ford Puma
How to disassemble the front headlight of the Ford Puma
Ford Puma (2019-2026 / MK 1) If you want to disassemble one of the front headlights of your new Ford Puma on your own, but you do not know the steps to follow, then all you have …
How to replace the rear turn signal bulbs of the Ford Puma
How to replace the rear turn signal bulbs of the Ford Puma
Ford Puma (2019-2026 / MK 1) Replacing the rear side indicator bulbs on a 2020 Ford Puma vehicle is a simple operation that can be done independently. First, open the trunk and t…
Dismantling the Front Bumper on the Ford Puma
Dismantling the Front Bumper on the Ford Puma
Ford Puma (2019-2026 / MK 1) Discover the procedure that will allow you to dismantle and reassemble the front bumper on the Ford Puma in simple steps. First, open the bonnet and …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos