Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlight of the Ford Puma

Model: Ford Puma MK 1 - Years 2019-2026
Part: Headlight

If you want to disassemble one of the front headlights of your new Ford Puma on your own, but you do not know the steps to follow, then all you have to do is read the following guide and follow the steps described. First of all, turn off the car completely and then reach the front area of the vehicle and lift the hood. At this point, use a cross screwdriver to unscrew the screws located above the headlight and disconnect the electrical connector connected to it. Finally, pull the front headlight outwards and complete the disassembly procedure.

Posted on 7 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear headlight of the Ford Puma
How to disassemble the rear headlight of the Ford Puma
Ford Puma (2019-2026 / MK 1) To safely and correctly disassemble one of the rear lights of your Ford Puma Mk2, you must carefully read the procedure described below and follow al…
How to replace the rear turn signal bulbs of the Ford Puma
How to replace the rear turn signal bulbs of the Ford Puma
Ford Puma (2019-2026 / MK 1) Replacing the rear side indicator bulbs on a 2020 Ford Puma vehicle is a simple operation that can be done independently. First, open the trunk and t…
Dismantling the Front Bumper on the Ford Puma
Dismantling the Front Bumper on the Ford Puma
Ford Puma (2019-2026 / MK 1) Discover the procedure that will allow you to dismantle and reassemble the front bumper on the Ford Puma in simple steps. First, open the bonnet and …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos