Do it yourself
| ||||
|
Ford Puma - Video tutorial
Model: Ford Puma
MK 1
- Years 2019-2024 Let's find out the procedure that will allow us to disassemble and reassemble the front bumper on the Ford Puma, in simple steps. First of all we open the bonnet and we go to remove the plastic cover that we find on the upper part of the bumper, unscrewing the screws with a socket wrench; after which we remove the lateral plastic bands and unscrew the fixing screws that we find on the lower part of the bumper, as shown in the video. At this point we can gently remove the front bumper; for reassembly just apply the reverse procedure!
Posted on 5 March 2024 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |