Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lambda Sensor on a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Oxygen sensor

Lift the front bonnet of your car and secure it with the prop rod. Remove the plastic engine cover panel (if present in the engine bay) using a screwdriver. Disconnect the power connector from the lambda sensor, then unscrew the sensor using a suitable spanner and remove it. Once you have extracted the sensor from its housing, compare it with the new part. Install the new sensor using the spanner and reconnect the power connector. Finally, refit the soundproofing engine cover.

Updated on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Lambda Sensor on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will learn how to remove the lambda sensor from a Ford Fiesta mk6. First, lift the vehicle with a hydraulic jack and plac…
Replacing Lambda Sensor on Ford Fiesta
Replacing Lambda Sensor on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Today, we will see how to remove and replace the lambda sensor on a second-generation Ford Fiesta. First, open the bonnet of your car and locate the …
Replacing Lambda Sensor on Ford Fiesta
Replacing Lambda Sensor on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Lift the car from the lower subframe and place two axle stands for support. The lambda sensor is located between the steering rack and the front driv…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos