Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Lambda Sensor on a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Oxygen sensor

In this video tutorial, you will learn how to remove the lambda sensor from a Ford Fiesta mk6. First, lift the vehicle with a hydraulic jack and place axle stands on both sides at the front: check the position of the lambda sensor located after the catalyst. Now, use a screwdriver to disconnect the electrical connector of the sensor and with a 22 mm spanner, unscrew it. Then proceed to fit the new lambda sensor: screw it in and reconnect it to the electrical connector. Remember to disconnect the battery cables before performing this operation.

Updated on 19 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing Lambda Sensor on Ford Fiesta
Replacing Lambda Sensor on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Today, we will see how to remove and replace the lambda sensor on a second-generation Ford Fiesta. First, open the bonnet of your car and locate the …
How to Replace the Lambda Sensor on a Ford Fiesta
How to Replace the Lambda Sensor on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Lift the front bonnet of your car and secure it with the prop rod. Remove the plastic engine cover panel (if present in the engine bay) using a screw…
Replacing Lambda Sensor on Ford Fiesta
Replacing Lambda Sensor on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Lift the car from the lower subframe and place two axle stands for support. The lambda sensor is located between the steering rack and the front driv…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos