Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Lambda Sensor on Ford Fiesta

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Oxygen sensor

See other generations:
Video tutorial

Lift the car from the lower subframe and place two axle stands for support. The lambda sensor is located between the steering rack and the front driveshaft and is very easy to remove; simply unscrew it by hand and disconnect the connector.

If the new sensor does not already have thermal paste, apply it yourself. Reconnect the connector and screw the lambda sensor back in exactly where the previous one was located.

To ensure the new sensor is functioning correctly, use the appropriate diagnostic tool and connect it to the ECU.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Removing the Lambda Sensor on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video tutorial, you will learn how to remove the lambda sensor from a Ford Fiesta mk6. First, lift the vehicle with a hydraulic jack and plac…
Replacing Lambda Sensor on Ford Fiesta
Replacing Lambda Sensor on Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Today, we will see how to remove and replace the lambda sensor on a second-generation Ford Fiesta. First, open the bonnet of your car and locate the …
How to Replace the Lambda Sensor on a Ford Fiesta
How to Replace the Lambda Sensor on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Lift the front bonnet of your car and secure it with the prop rod. Remove the plastic engine cover panel (if present in the engine bay) using a screw…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos