Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

Today we will explain how to remove the door panel of a 2015 Ford Focus car in less than 10 minutes. To perform this operation, we must first open the door in question and insert a plastic lifting tool into the small slot on the outside of the door.

Remove the tail light and using the plastic removal tool, release the handle and lift the window switch panel. Using a 25mm Torx key, remove the screws behind the handle.

Remove the door handle by lifting the cover and unscrewing the screw. Remove the lower and side screws and then release the panel.

Disconnect the connector to completely remove the panel. After removing the panel, we can remove the speaker by unscrewing the locking screws and disconnecting the connector, and it is also possible to perform maintenance on the window motor.

The panel installation follows the reverse procedure.


Posted on 27 September 2025 by ScegliAuto


Related tutorials

How to Remove the Door Panel of the Ford Focus
How to Remove the Door Panel of the Ford Focus
Ford Focus (2011-2018 / MK 3) Removing the door panel for internal maintenance on a Ford Focus is a straightforward task that can be done independently. The first step is to remov…
Removing the Door Panel on a Ford Focus
Removing the Door Panel on a Ford Focus
Ford Focus (2011-2018 / MK 3) Want to remove the door panel? Here’s how to take off the front panel of a Ford Focus. Unscrew the screws located in the space of the upper door open…
How to Remove the Door Panel of the 2010 Ford Focus
How to Remove the Door Panel of the 2010 Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To remove the door panel of the 2010 Ford Focus, first disconnect the triangle on the side and then remove the cover of the locking handle to access …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos