Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Door trim panel

Want to remove the door panel? Here’s how to take off the front panel of a Ford Focus. Unscrew the screws located in the space of the upper door opening lever and the screws present in the handle: remove the cover of the inner handle and the window switch panel. Remove the trim plastic near the corner of the window, unscrew the remaining screws on the door panel, and detach the retaining clips from it. Pull off the panel and unclip it from the door (disconnect the power wiring and the opening cable). Replace the removed panel or reassemble the same one.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Right Door Panel on a Ford Focus
Removing the Right Door Panel on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Carry out the removal of the front right door panel on a Ford Focus. Disconnect the battery terminals located in the engine bay, then using a screwdr…
Replacing the Outer Door Handle on a Ford Focus
Replacing the Outer Door Handle on a Ford Focus
Ford Focus (1998-2004 / MK 1) Briefly, we will see the steps to remove and replace the outer door handle on the front door of a Ford Focus. First, open the front door of the vehic…
Removing the Front Door Panel of the Ford Focus
Removing the Front Door Panel of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Here are the steps to remove and replace the front door panel of the Ford Focus. First, open the front door and start unscrewing the fixing screws lo…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos