Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Tail light

See other generations:
Video tutorial

If you own a Ford Focus and want to learn how to disassemble the rear light on your own, all you have to do is read the following guide and apply what is described. First, lift the rear hood of the car and unscrew the screws located on the inside of the trunk.

Once you have done this, remove the plastic cover and then use an 11mm key to unscrew the other screws. Then go back outside and pull the rear light towards you. Finally, disconnect the electrical cable from the headlight and you have successfully completed the task.


Posted on 29 September 2025 by ScegliAuto


Related tutorials

How to disassemble the rear headlight of the Ford Focus
How to disassemble the rear headlight of the Ford Focus
Ford Focus (1998-2004 / MK 1) In this guide, we will discover the information that will allow us to disassemble and replace the rear headlight and its bulbs of the Ford Focus. Fir…
How to disassemble the rear headlight of the Ford Focus
How to disassemble the rear headlight of the Ford Focus
Ford Focus (1998-2004 / MK 1) If you want to disassemble one of the two rear lights of your Ford Focus by yourself, all you have to do is read the following guide carefully and fo…
How to replace the rear headlight bulb of the Ford Focus
How to replace the rear headlight bulb of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will explain how to replace the rear headlight bulb of the Ford Focus. First, open the trunk of the vehicle and then unscrew the screw that …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos