Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the radiator grille of the Ford Focus mk3?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Radiator

The radiator of a car plays a fundamental role, as it contains the engine coolant and maintains its temperature within certain values. In front of it, there is a grille, which if you want to remove and replace, involves some operational steps described below and visible in the video tutorial available here: part of the work must be done from below, in fact, you must first remove the engine partition, then, making space, unscrew the fixing pins of the aforementioned radiator and disconnect its coolant inlet and outlet pipes. Once this is done, we will remove the grille and radiator from the top.

Posted on 30 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Removal of the Radiator Grille
Removal of the Radiator Grille
Ford Focus (1998-2004 / MK 1) This brief tutorial shows how to remove the radiator grille from a Ford Focus. After opening the bonnet, remove the four screws that secure the plast…
How to Remove the Front Bumper Grille on a Ford Focus
How to Remove the Front Bumper Grille on a Ford Focus
Ford Focus (2011-2018 / MK 3) Want to replace the central air grille on your vehicle? Here’s how to remove the front bumper grille on a Ford Focus: using a plastic lever or screwd…
Replacement of the cooling radiator of the Ford Focus ST
Replacement of the cooling radiator of the Ford Focus ST
Ford Focus (2011-2018 / MK 3) Today we will discover the steps that will allow us to disassemble and replace the engine cooling radiator of the Ford Focus ST. First, lift the vehi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos