Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire warning light in the Ford Tourneo van?

Model: Ford Tourneo MK 2 - Years 2013-2024
Part:

Resetting the tire warning light in the Ford Tourneo van, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we need to have restored the correct pressure in each tire following the instructions in the manual. Let's start by going inside the cabin, then turn on the instrument panel and navigate to the general menu on the touchscreen display. Next, we enter "Vehicle," "Tyre press.," and perform the reset by selecting the "SET" option. At this point, all that's left to do is restart the instrument panel and check that the operation was successful.

Posted on 1 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on a Ford Tourneo Van?
How to Reset the Tyre Warning Light on a Ford Tourneo Van?
Ford Tourneo (2013-2024 / MK 2) As shown in this tutorial, resetting the tyre warning light on a Ford Tourneo van is a very simple operation. Before proceeding, ensure that you have…
Resetting the tire pressure warning light on the Ford Tourneo Custom.
Resetting the tire pressure warning light on the Ford Tourneo Custom.
Ford Tourneo (2013-2024 / MK 2) Let's go ahead and perform the tire pressure monitoring system (TPMS) reset procedure on the Ford Tourneo; before resetting, it is necessary for all …
Resetting the tire pressure warning light on the Ford Tourneo.
Resetting the tire pressure warning light on the Ford Tourneo.
Ford Tourneo (2013-2024 / MK 2) In a few simple steps, we will see how to reset the tire pressure light on the Ford Tourneo; before resetting the TPMS sensors, it is necessary that …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos