Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Ford Tourneo Van?

Model: Ford Tourneo MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tire pressure warning light

See other generations:
Video tutorial

As shown in this tutorial, resetting the tyre warning light on a Ford Tourneo van is a very simple operation. Before proceeding, ensure that you have restored the correct pressure in each tyre, which may have been lost due to natural wear.

Start by entering the cabin and turning on the ignition, then access the general menu using the left arrow button on the steering wheel. Next, go into "Settings", then "Driver Assist", and scroll down until you find "Tyre monitor". At this point, you can perform the reset by holding down the "OK" button until you see the confirmation message.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to reset the tire warning light in the Ford Tourneo van?
How to reset the tire warning light in the Ford Tourneo van?
Ford Tourneo (2013-2024 / MK 2) Resetting the tire warning light in the Ford Tourneo van, as we can see in this tutorial, is an extremely simple and quick operation. Before proceedi…
Resetting the Tyre Pressure Warning Light on the Ford Tourneo Custom
Resetting the Tyre Pressure Warning Light on the Ford Tourneo Custom
Ford Tourneo (2013-2024 / MK 2) Let's perform the reset procedure for the tyre pressure warning light (TPMS) on the Ford Tourneo; before resetting, ensure that all four tyres are at…
Resetting the tire pressure warning light on the Ford Tourneo.
Resetting the tire pressure warning light on the Ford Tourneo.
Ford Tourneo (2013-2024 / MK 2) In a few simple steps, we will see how to reset the tire pressure light on the Ford Tourneo; before resetting the TPMS sensors, it is necessary that …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos