Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the tire pressure warning light on the Ford Tourneo.

Model: Ford Tourneo MK 2 - Years 2013-2024
Part:

In a few simple steps, we will see how to reset the tire pressure light on the Ford Tourneo; before resetting the TPMS sensors, it is necessary that all four tires are at the correct pressure. Then, get into the car and start the engine; then use the controls on the steering wheel to enter the vehicle settings and then the tire pressure monitoring system, as shown in the video. At this point, press the "ok" button again and confirm the reset of the TPMS sensors, thus resetting the warning light!

Posted on 30 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on the Ford Tourneo 2016
How to Reset the Tyre Warning Light on the Ford Tourneo 2016
Ford Tourneo (2013-2024 / MK 2) To manually reset the tyre warning light that appears on the instrument cluster of your Ford Tourneo 2016, follow the instructions in this dedicated …
How to Reset the Tyre Pressure Warning Light on a Ford Tourneo
How to Reset the Tyre Pressure Warning Light on a Ford Tourneo
Ford Tourneo (2013-2024 / MK 2) To reset the tyre pressure warning light on the Ford Tourneo, turn on the ignition by rotating the key in the ignition switch. Once the ignition is o…
How to reset the tire warning light in the Ford Tourneo van?
How to reset the tire warning light in the Ford Tourneo van?
Ford Tourneo (2013-2024 / MK 2) Resetting the tire warning light in the Ford Tourneo van, as we can see in this tutorial, is an extremely simple and quick operation. Before proceedi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos