Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulb of the Ford Edge 2.

Model: Ford Edge MK 2, Cd539 - Years 2015-2024
Part: Tail light bulb

To correctly replace the rear headlight bulb of your second-generation Ford Edge, you need to carefully read all the steps described below and apply them step by step. First of all, purchase a new bulb that is perfectly compatible with the car's headlight, then lift the rear hatch and remove the protective rubber located next to the headlight. Once you have done this, use a flathead screwdriver to unscrew the screw present and pull the headlight towards you. Finally, proceed to replace the faulty bulb with the new one and properly reassemble the headlight.

Posted on 26 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Ford Edge
Replacement of the front headlight bulb of the Ford Edge
Ford Edge (2006-2014 / U387, MK 1) Today we will see the steps that will allow us to disassemble and replace the headlight bulb of the Ford Edge. First of all, we open the hood of the …
How to Replace the Front Headlamp Bulb on a Ford Edge
How to Replace the Front Headlamp Bulb on a Ford Edge
Ford Edge (2006-2014 / U387, MK 1) This guide shows you how to remove and replace the front headlamp bulb on a Ford Edge in simple and quick steps. First, open the bonnet of your car a…
How to Replace the Dipped Beam Bulb on a Ford Edge
How to Replace the Dipped Beam Bulb on a Ford Edge
Ford Edge (2006-2014 / U387, MK 1) Using dipped beam headlights while driving is essential in certain situations, so if one of the bulbs in your first-generation Ford Edge is faulty, y…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos