Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Ford Edge

Model: Ford Edge MK 1, U387 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

Today we will see the steps that will allow us to disassemble and replace the headlight bulb of the Ford Edge. First of all, we open the hood of the car and start removing the plastic cover that we find on the back of the headlight; then we disconnect the electrical connector to remove the bulb, unhooking the metal clip if present, as shown in the video.

At this point we remove and replace the low beam bulb with the new one, of the correct type and with the same attachment; we check its operation and finally fix the plastic cap.


Posted on 18 December 2024 by ScegliAuto


Related tutorials

Replacing the Dipped Beam Bulb on a Ford Edge
Replacing the Dipped Beam Bulb on a Ford Edge
Ford Edge (2006-2014 / MK 1, U387) In this guide, we will see how to replace the dipped beam bulbs on the Ford Edge. This is a simple and quick operation that you can perform yourself …
How to Replace the Ford Badge on the Ford Edge
How to Replace the Ford Badge on the Ford Edge
Ford Edge (2006-2014 / MK 1, U387) In this guide, you will find instructions to remove and replace the manufacturer badge on the Ford Edge. First, move to the front of the vehicle and …
Replacement of the license plate light bulb on a Ford Edge
Replacement of the license plate light bulb on a Ford Edge
Ford Edge (2015-2024 / MK 2, Cd539) We can see in this very short video tutorial how to replace the license plate light bulb on a Ford Edge, second generation model produced from 2015 o…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos