Do it yourself
| ||||
|
Ford Edge - Video tutorial
Model: Ford Edge
MK 1
- Years 2006-2014 Thanks to this guide today we are going to see how to replace the low beam bulbs on our Ford Edge, this is a simple and quick operation that we can do ourselves in a few minutes, but let's see the procedure immediately. Let's start by opening the hood of the vehicle, then we remove the plastic rear cap that protects the low beam by turning it to the left. Once we have done this, we grab the bulb and rotate it counterclockwise to then remove it from its socket, finally we disconnect the old bulb from the connector and replace it with a new one following the reverse procedure.
Posted on 22 April 2024 by ScegliAuto
Other guides that may interest you |
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |