Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the license plate light bulb on a Ford Edge

Model: Ford Edge MK 2, Cd539 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: License plate light

See other generations:
Video tutorial

We can see in this very short video tutorial how to replace the license plate light bulb on a Ford Edge, second generation model produced from 2015 onwards. So first of all, we insert a screwdriver on the outer side of the light fixture to release its locking tab and then remove it from its seat as shown in the video, then we rotate it counterclockwise to separate it from the bulb.

Once this is done, we can remove the old bulb from the socket and insert a new one, finally reassemble everything following the reverse procedure.


Posted on 14 May 2025 by ScegliAuto


Related tutorials

Replacing the Number Plate Lights on a Ford Edge
Replacing the Number Plate Lights on a Ford Edge
Ford Edge (2006-2014 / MK 1, U387) Today's information will show you the procedure for removing and replacing the number plate bulbs on a Ford Edge. First, open the tailgate to bring i…
How to Replace the Number Plate Light Bulbs on a Ford Edge?
How to Replace the Number Plate Light Bulbs on a Ford Edge?
Ford Edge (2006-2014 / MK 1, U387) In this tutorial, see how to replace the number plate light bulbs on a Ford Edge, a very simple and quick operation. To do this, open the boot for co…
Replacement of the front headlight bulb of the Ford Edge
Replacement of the front headlight bulb of the Ford Edge
Ford Edge (2006-2014 / MK 1, U387) Today we will see the steps that will allow us to disassemble and replace the headlight bulb of the Ford Edge. First of all, we open the hood of the …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos