Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Ford Edge

Model: Ford Edge U387, MK 1 - Years 2006-2014
Part: Headlight bulb

This guide shows you how to remove and replace the front headlamp bulb on a Ford Edge in simple and quick steps. First, open the bonnet of your car and start by removing the plastic protective cap located behind the headlamp; then disconnect the electrical connector of the bulb by releasing the metal clip to remove it and replace it with the new one, as shown in the video. Now install the new bulb, ensuring it has the same fitting, by inserting it first into the bulb holder and then into the headlamp unit, following the video until the end!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb in a Ford Edge
Ford Edge (2015-2024 / MK 2, Cd539) Let's see how to proceed with replacing the front headlight bulb in a Ford Edge. Open the engine compartment and secure it; remove the front headligh…
Replacement of the front headlight bulb of the Ford Edge
Replacement of the front headlight bulb of the Ford Edge
Ford Edge (2006-2014 / U387, MK 1) Today we will see the steps that will allow us to disassemble and replace the headlight bulb of the Ford Edge. First of all, we open the hood of the …
How to Replace the Dipped Beam Bulb on a Ford Edge
How to Replace the Dipped Beam Bulb on a Ford Edge
Ford Edge (2006-2014 / U387, MK 1) Using dipped beam headlights while driving is essential in certain situations, so if one of the bulbs in your first-generation Ford Edge is faulty, y…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos