|
Do it yourself
| |||
| ||||
How to Replace a Bulb in the Front Headlamps of a Ford Fiesta
Model: Ford Fiesta
MK 7, MK VII, Fiesta 7
- Years 2017-2023
To replace the bulb in the front headlamp of a Ford Fiesta MK7, you need to unscrew the screws that secure the headlight assembly: there are 3 screws requiring a star screwdriver and an Allen key. Disconnect the main electrical connector that powers the entire headlamp, located on the outer side. Now you can pull the headlamp outwards and place it on a flat surface. Remove the rubber cap at the back, pull out the old bulb from its housing, disconnect the connector, attach it to the new bulb (without touching the bulb with your hands), insert it into the housing, and secure it with the metal tab. Replace the rubber cap, and reinsert the headlamp, ensuring the pin goes underneath, not above. Re-screw the three screws, reconnect the main electrical connector, and test the lights.
Posted on 23 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
Today we will show you the steps to replace the front headlight bulbs of the Ford Fiesta. The first step is to open the front hood. The second step i…
Ford Fiesta
(2002-2008 /
Fiesta 5, MK 5, MK V)
In this video tutorial, you will learn how to remove the headlights and replace the bulbs on the Ford Fiesta. First, open the engine bonnet: release …
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
If you own a Ford Fiesta Mk6 and are experiencing issues with one of the front headlight bulbs, simply read the following guide carefully and apply t…
Other guides you may be interested in
|
Where is the Spare Wheel in the Peugeot 5008?
This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.146
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |