Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Headlight bulb

Today we will show you the steps to replace the front headlight bulbs of the Ford Fiesta. The first step is to open the front hood. The second step is to unscrew the central upper screw located above the headlight. The third step is to remove the headlight and disconnect the connector. The fourth step is to unscrew the cap of the light fixture and remove the bulb inside. The fifth step is to insert the new bulb. The sixth step is to screw the screw back in and close the front hood to test the bulb. To replace the bulb of the right headlight, follow the same steps.

Posted on 28 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Headlights on Ford Fiesta
Removing Front Headlights on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will learn how to remove the headlights and replace the bulbs on the Ford Fiesta. First, open the engine bonnet: release …
How to Replace the Rear Light Bulbs on a Ford Fiesta?
How to Replace the Rear Light Bulbs on a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the rear light bulbs on a Ford Fiesta, lift the boot and remove the screws located next to the seal, right next to the light. This will al…
How to Replace the Rear Light Bulbs on a Ford Fiesta?
How to Replace the Rear Light Bulbs on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the rear light bulbs on a Ford Fiesta, you need to remove the entire light assembly: to do this, open the boot and insert your fingers bet…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos