Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the pollen filter on Ford Transit

Model: Ford Transit MK 7 - Years 2006-2014
Part: Cabin air filter

How to replace the pollen filter fitted to a Ford Transit? Let's see in this video how to disassemble the filter placed in the dedicated housing. We open and lift the front hood; with a screwdriver we unscrew the screws of the plastic covering placed under the front windshield, then, with a lever, remove the filter holder cover (where the pollen filter is present). Remove the cap from the filter holder with a screwdriver and extract the cabin filter. We insert a new filter (making it adhere well around the walls) in the box. Finally we reassemble the filter box cap and tighten the screws. We close the bonnet after maintenance.

Posted on 11 January 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace the pollen filter on the Ford Transit Mk8
How to replace the pollen filter on the Ford Transit Mk8
Ford Transit (2014-2024 / MK 8) The guide shows you how to replace the pollen filter on the Ford Transit Mk8. The operation is very simple and easy to perform. The first operation t…
How to replace the pollen filter on Ford Transit
How to replace the pollen filter on Ford Transit
Ford Transit (2006-2014 / MK 7) In this short video tutorial we will see how to remove and replace the cabin air filter or pollen filter on the Ford Transit, following these simple …
Changing the cabin filter on Ford Transit
Changing the cabin filter on Ford Transit
Ford Transit (2014-2024 / MK 8) On Ford Transit, the cabin air filter, or pollen filter, is located behind the glove box. To move the aforementioned compartment, you must first open…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos