Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Ford Focus SW 2008

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Tail light

Do you need to remove the rear light of your Focus? Whether you need to replace the bulb or change the entire unit, here are the tips for a perfect job. Park the car safely and open the boot. Using a cross-head screwdriver, remove the two screws that hold the light assembly to the bodywork. Gently pull the unit towards you until it comes free from its housing and disconnect the connector. Now unscrew the three screws of the bulb holder. Carefully separate the two pieces to avoid damaging the rubber seal; now you can access the bulbs.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear taillight of the Ford Focus
Replacement of the rear taillight of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will see the information that will show us how to disassemble and replace the rear taillight and its bulbs of the Ford Focus. First, we open…
How to disassemble the rear headlight of the Ford Focus
How to disassemble the rear headlight of the Ford Focus
Ford Focus (1998-2004 / MK 1) In this guide, we will discover the information that will allow us to disassemble and replace the rear headlight and its bulbs of the Ford Focus. Fir…
How to disassemble the rear headlight of the Ford Focus
How to disassemble the rear headlight of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) If you own a Ford Focus and want to learn how to disassemble the rear light on your own, all you have to do is read the following guide and apply wha…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos