Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of a Ford Kuga

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012
Part: Key

See other generations:
Video tutorial

Learn how to replace the remote battery of a Ford Kuga. Slide the button (located on top of the remote) to release the metal key. Once extracted, use a screwdriver to pry between the two key covers. Pry until the two covers separate.

Remove the flat battery with a screwdriver and take a new one of the same size and voltage. Reassemble the two parts of the cover with the buttons by pressing on the remote key until you hear the locking click.

Insert the metal key back into the remote. Check the proper functioning of the remote.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in the Ford Kuga?
How to Replace the Remote Battery in the Ford Kuga?
Ford Kuga (2008-2012 / MK 1, C394) As seen in this tutorial, replacing the remote battery in the Ford Kuga is an extremely simple and quick operation. You will need a replacement CR203…
How to Replace the Remote Battery for a Ford Kuga
How to Replace the Remote Battery for a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) This guide shows how to replace the remote battery for the 2014 Ford Kuga. The first step is to open the compartment where the physical key is stored…
How to Replace the Remote Battery for a Ford Kuga
How to Replace the Remote Battery for a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) In the video description, you will see how to replace the dead battery in the remote for a Ford Kuga. If possible, simply open the remote casing at t…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos