Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery for a Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

This guide shows how to replace the remote battery for the 2014 Ford Kuga. The first step is to open the compartment where the physical key is stored, using the two buttons on the side of the remote. At this point, use a flathead screwdriver to separate the two halves of the remote.

You can then replace the old battery with a new CR2032, ensuring the positive terminal is placed at the bottom of the housing. Following the previous steps in reverse, reassemble the remote.

After the replacement, check the remote's proper functioning.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in the Ford Kuga?
How to Replace the Remote Battery in the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) To replace the battery in the Ford Kuga remote, slide the button located at the top of the remote to release the key inside. After removing the key, …
How to Replace the Key Fob Battery on the Ford Kuga?
How to Replace the Key Fob Battery on the Ford Kuga?
Ford Kuga (2008-2012 / MK 1, C394) To replace the battery in the key fob of the Ford Kuga, lift the plastic cover with the brand logo, unclipping it. Inside, you will find the key blad…
How to Replace the Remote Battery for a Ford Kuga
How to Replace the Remote Battery for a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) In the video description, you will see how to replace the dead battery in the remote for a Ford Kuga. If possible, simply open the remote casing at t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos