Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Folding Mirror Motor on a Ford Vehicle

Model: Ford Kuga MK 3 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Side mirror

See other generations:
Video tutorial

Replacing the folding mirror motor on Ford (Focus, Kuga, Fiesta) is straightforward if you only replace the motor and not the entire assembly. The gear parts are usually intact, so it is more cost-effective to change just the motor.

Remove the mirror glass and the plastic housing. Disconnect the electrical connector.

Using a screwdriver, unscrew the screws that secure the motor and pull it out. Install the new motor, reconnect the connector, and reattach the glass. You can find the new motor on AliExpress with code 1005005269889291 for €11.69 (free shipping over €0.00). If you purchase the complete motor block with gears, you can disassemble it and replace all internal parts, leaving the original shell.


Posted on 2 September 2026 by ScegliAuto


Related tutorials

How to Change the Wing Mirror on a Ford Kuga
How to Change the Wing Mirror on a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) How to change the mirror on a Ford Kuga? Remove the external wing mirror if damaged and replace it with a new one of the same size. Pry between the e…
Replacing the External Wing Mirror on a Ford Kuga
Replacing the External Wing Mirror on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) In this guide, you will find instructions to remove and replace the external wing mirror on a Ford Kuga. First, open the external wing door and start…
How to Change the Wing Mirror on a Kuga
How to Change the Wing Mirror on a Kuga
Ford Kuga (2008-2012 / MK 1, C394) Is the wing mirror on your Ford Kuga damaged? Let's look at removing the external mirror. Open the car door, remove the covering plastic at the corne…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos