Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Kuga
  6. : How to change the rearview mirror of the Kuga

Ford Kuga - Video tutorial

Model: Ford Kuga MK 1, C394 - Years 2008-2012
Part: Outside rearview mirror
Operation: How to change the rearview mirror of the Kuga

How to change the mirror of the Ford Kuga? We disassemble the external rear-view mirror if damaged and replace it with a new one of the same size. We pry between the perimeter of the mirror frame and the mirror glass of the same. We lever until the plastics of the support at the base detach from the mirror (disconnect the power cable); very delicate operation because the slide or the mirror itself could break. We replace the damaged part with a new one of the same size and model. We are careful to engage the plastic snap clips in the mirror supports. Let's adjust the mirror finally.


Posted on 13 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos