Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glass from the External Mirror of the Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Side mirror

If the glass of the external mirror on the Ford Kuga breaks, you can replace just the glass instead of the entire unit. To remove the glass, simply push it sideways and then pull it outwards, being careful not to damage the internal connector. Disconnect the connector and completely remove the glass. To fit a new one, connect the small connector and then insert it by pushing it inwards, ensuring the clips are aligned. Once replaced, clean the glass with water or a car glass cleaner spray.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Mirror Bulb on the Ford Kuga
How to Replace the Mirror Bulb on the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) To replace the bulb in the external rear-view mirror of the Ford Kuga, lever under the glass of the mirror to extract it from the housing. Once the g…
Replacing the External Wing Mirror on a Ford Kuga
Replacing the External Wing Mirror on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this guide, you will find instructions to remove and replace the external wing mirror on a Ford Kuga. First, open the external wing door and start…
Ford Kuga External Mirror Indicator Bulb Replacement
Ford Kuga External Mirror Indicator Bulb Replacement
Ford Kuga (2012-2019 / C520, MK 2) Here’s how to remove and replace the indicator bulb of the external mirror of a second series Ford Kuga. To remove the bulb, you need to take off the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos