Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel and Wing Mirror of the Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Door trim panel

Below are the steps necessary to remove and replace the front door panel and the external wing mirror of the Ford Kuga. First, open the front door and begin by removing the plastic cover of the door handle, unscrewing all the screws found on the side of the panel. Then, pry it off from the sides to detach and remove it, disconnecting the handle cable and the electrical connector for the window switch, as shown in the video. At this point, you can also remove and replace the external wing mirror, reassembling everything afterwards!

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Wing Mirror on a Kuga
How to Change the Wing Mirror on a Kuga
Ford Kuga (2008-2012 / C394, MK 1) Is the wing mirror on your Ford Kuga damaged? Let's look at removing the external mirror. Open the car door, remove the covering plastic at the corne…
Removing External Wing Mirror on Ford Kuga
Removing External Wing Mirror on Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In today's tutorial video, you will learn how to remove the external wing mirror of a second-generation Ford Kuga. First, open the front door and rem…
How to Change the Wing Mirror on a Ford Kuga
How to Change the Wing Mirror on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) How to change the mirror on a Ford Kuga? Remove the external wing mirror if damaged and replace it with a new one of the same size. Pry between the e…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos