Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Door Handle from the Ford Kuga - Escape

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Handle

This guide outlines the procedure to remove and replace the external door handle on the Ford Kuga, as well as the Ford Escape. First, open the front door and begin to dismantle and remove the door panel by unscrewing all the fixing screws; then remove the small plastic cap located on the side of the door, as shown in the video. At this point, unscrew the fixing screw located inside the hole using a Torx screwdriver; remove the rectangular plastic piece to later replace the entire handle!

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Ford Kuga
How to Remove the Door Panel of a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Before starting, open the door of your Ford Kuga. Begin by prising out and removing the internal door handle insert using a thin but sturdy tool. Nex…
How to Remove the Tailgate Panel of the Ford Kuga - Escape
How to Remove the Tailgate Panel of the Ford Kuga - Escape
Ford Kuga (2012-2019 / C520, MK 2) .. trim of the tailgate of the Ford Kuga and Ford Escape. First, open the tailgate and start removing the plastic covers by unscrewing the screws found.. …
Removing the Handle from the Ford Kuga
Removing the Handle from the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Is the door handle damaged? Let's see how to remove it from the door. Pry off the cover cap to access the screws located in the handle. Unscrew the s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos