Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Handle from the Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Handle

See other generations:
Video tutorial

Is the door handle damaged? Let's see how to remove it from the door. Pry off the cover cap to access the screws located in the handle.

Unscrew the screw on the side of the door with a screwdriver as shown in the video, remove the right lock of the handle, then slide the handle to the left of the door. Remove the door opening handle and insert the new piece into the door.

Fit the new handle into the car door: install the right lock and screw in the fastening screws. Close the screw hole with the cover cap.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Remove the External Door Handle from the Ford Kuga - Escape
How to Remove the External Door Handle from the Ford Kuga - Escape
Ford Kuga (2012-2019 / MK 2, C520) This guide outlines the procedure to remove and replace the external door handle on the Ford Kuga, as well as the Ford Escape. First, open the front …
How to Remove the Door Panel and Wing Mirror of the Ford Kuga
How to Remove the Door Panel and Wing Mirror of the Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) Below are the steps necessary to remove and replace the front door panel and the external wing mirror of the Ford Kuga. First, open the front door an…
How to Remove the Door Panel of a Ford Kuga
How to Remove the Door Panel of a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) Before starting, open the door of your Ford Kuga. Begin by prising out and removing the internal door handle insert using a thin but sturdy tool. Nex…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos