Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel of a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Door trim panel

Before starting, open the door of your Ford Kuga. Begin by prising out and removing the internal door handle insert using a thin but sturdy tool. Next, dislodge and remove the window switch, then disconnect its electrical connector. Once done, unscrew and remove the screws securing the door panel. At this point, dislodge and remove the panel from its housing, then detach the handle cable, and the disassembly will be complete.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga (2012-2019 / C520, MK 2) To remove the door panel from a Ford Kuga, start by unscrewing the securing screws located above the door panel. Remove any screws located in the pla…
Ford Kuga (2012-2019 / C520, MK 2) Before you can begin, open the front door of your Ford Kuga. Start by unclipping and removing the insert located behind the internal opening handle. …
Ford Kuga (2008-2012 / C394, MK 1) Below are the steps necessary to remove and replace the front door panel and the external wing mirror of the Ford Kuga. First, open the front door an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos