Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel from a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Door trim panel

To remove the door panel from a Ford Kuga, start by unscrewing the securing screws located above the door panel. Remove any screws located in the plastic of the door opening lever (if present). Take off the handle from the door panel, then use a lever to detach the upper trim panel. Use the lever to pry the panel away from the door and disconnect the electrical connectors (pass the lever around the panel). Reassemble everything in reverse order. Connect the electrical connectors to the new cover panel, secure the clips, and screw in the screws.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Panel on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Learn how to remove the covering panel of the door on a Ford Kuga. Remove the screw cover cap inside the space of the door opening lever (unscrew the…
Removing the Rear Wiper Arm of the Ford Kuga
Removing the Rear Wiper Arm of the Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Want to remove the rear wiper arm? Follow the steps to detach the arm and install it on the rear tailgate of the Kuga. Lift the protective plastic on…
How to Remove the Door Panel and Wing Mirror of the Ford Kuga
How to Remove the Door Panel and Wing Mirror of the Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Below are the steps necessary to remove and replace the front door panel and the external wing mirror of the Ford Kuga. First, open the front door an…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos