Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Condensation from the Front Headlight of the Ford Mondeo

Model: Ford Mondeo / Fusion - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

Video tutorial

Below are the main instructions on how to remove the condensation inside the front headlight of the Ford Mondeo. First, open the bonnet of the vehicle and start unscrewing the fixing screws of the front headlight, disconnecting the bulb's electrical connector to remove it; then remove the plastic protection caps of the bulbs, drying out all the condensation found inside with air, as shown in the video.

Then repair the optical unit, replacing it with a new one if necessary; refit the front headlight!


Posted on 15 October 2026 by ScegliAuto


Related tutorials

How to Replace Front Bulbs on Ford Mondeo
How to Replace Front Bulbs on Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) How do you remove the bulbs from the front headlamp of a Ford Mondeo? Let's look at the disassembly. Release the front bonnet by pulling the lever lo…
How to Replace the Front Headlamp Bulbs on a Ford Mondeo
How to Replace the Front Headlamp Bulbs on a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the headlamp inspection cover and remove it (…
How to Remove and Replace the Front Headlight on a Ford Mondeo
How to Remove and Replace the Front Headlight on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) This brief guide provides instructions on how to remove and replace the front headlight on a Ford Mondeo in simple steps. First, open the car's bonne…

How to reset the AdBlue warning light on the Renault Trafic?

If the AdBlue warning light on the Renault Trafic remains on even after refilling with the additive, it is possible that a programming error has occurred in the AdBlue management unit: this unit is located inside the engine compartment and must be removed and disconnected to perform a diagnosis. The unit must then be connected to the appropriate diagnostic tool so that all stored errors can be reset correctly; after the reset, reinstall the unit, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos