Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Front Bulbs on Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Headlight bulb

How do you remove the bulbs from the front headlamp of a Ford Mondeo? Let's look at the disassembly. Release the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure it. Reach in and locate the inspection cap of the headlamp (located at the rear of the headlamp). Remove the cap behind the headlamp, pull out the bulb holder from the headlamp, and extract the damaged bulbs using a screwdriver. Fit the new bulbs (always of the correct type and size) and insert the bulb holder into the headlamp housing. Refit the plastic cap that closes the headlamp. Check if the lights illuminate.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlamp Bulb on the Ford Mondeo
How to Replace the Headlamp Bulb on the Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In today's video, we will see how to replace the headlamp bulb on the Ford Mondeo. First, it is recommended to proceed with the engine cold to avoid …
Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCI
Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCI
Ford Mondeo / Fusion (2007-2014 / MK 3) Today's steps will show you the procedure for removing and replacing the timing belt on the Ford Mondeo. First, raise the vehicle and begin by removi…
How to Replace the Timing Belt on a Ford Mondeo
How to Replace the Timing Belt on a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) Today, with the help of the following video tutorial, you will learn how to replace the timing belt on a Ford Mondeo. Start by opening the bonnet and…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos