Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulbs on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Headlight

See other generations:
Video tutorial

Lift the bonnet and prop it open. Disconnect the battery.

Remove the front bumper by unscrewing the small plastic pins, as shown in the video. Once removed, slide out the plastic rods located at the bottom of the headlight, near the screws.

At this point, you can extract the headlight, disconnecting the connector by pressing the small lever. Place it on a workbench for convenience, and open the headlight by pressing on the two side clips.

Once the lower cover is removed, simply unscrew the old bulb and screw in the new one. Reassemble the headlight by reversing the steps.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulbs on a Ford Mondeo
How to Replace the Front Headlamp Bulbs on a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the headlamp inspection cover and remove it (…
How to Remove Condensation from the Front Headlight of the Ford Mondeo
How to Remove Condensation from the Front Headlight of the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Below are the main instructions on how to remove the condensation inside the front headlight of the Ford Mondeo. First, open the bonnet of the vehicl…
How to Replace Front Bulbs on Ford Mondeo
How to Replace Front Bulbs on Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) How do you remove the bulbs from the front headlamp of a Ford Mondeo? Let's look at the disassembly. Release the front bonnet by pulling the lever lo…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos